Veko VEDVR 2108 Instruções de Operação descarregar pdf (Página 13)

EcoSense

Step 3 Connecting Audio

The unit supports two channels of bi-directional audio, accessible through NetVu ObserVer. Connect

the audio equipment to the phono sockets AUDIO IN and AUDIO OUT. The audio channel defaults

to recording camera 1.

The following modes of operation are supported:

• Challenge – intruders from an RVRC.

• Listen – to local audio from a site at the RVRC.

• Record - local audio from a site with the video.

• Replay - all audio through a local Audio output (not supported when

Audio out is used as a challenge/PA source)

Note: The Audio output can be congured as a challenge output or as a replay output.

Step 4 Connecting to the Network

The unit supports a 10/100Mbps auto-detecting network port. Use a CAT5 cable to connect the unit

to the network.

By default the unit is congured for DHCP i.e. the unit is automatically allocated an IP address from

a network DHCP server.

DHCP works by assigning an IP address at initial connection to the network. It is possible however

that this IP address can change without notication i.e. following power failure. It is therefore

recommended that the unit be allocated a xed IP address. A xed IP address can be assigned via

the Conguration Menu pages:Network Settings->Network->IP Address.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 119 120

Sem comentários

Veko VEDVR 2108 Instruções de Operação Página 13